Home Installation of Trektop™ Glide for Jeep JK 2 door, 2007-2018

A Manufacturer Certified Technician will install Trektop™ Glide for Jeep JK 2 door, 2007-2018

How to Prepare:                                                                                                                                                       

• Confirm that your product arrives as scheduled and appears ready for installation
• Remove any aftermarket accessories to accommodate the hard-top removal
• Prepare an area to set down the existing hard-top or panels within 20 feet of installation site
• Tops should be installed in a warm environment (ideally around or above 72 degrees Fahrenheit, but this is not necessary. Ask the customer to bring the top indoors the night before the installation.  The fabric will warm up and be more pliable. The fabric expands; the higher the temperature is, the more flexible it will be. The manual recommends laying it in the sun on concrete if this is possible.
• Make sure the Jeep® can be accessed from all sides
• Have a person 18 years or older present for the entire On-Site Service appointment
• As a courtesy, and if applicable, inform your technician of special parking requirements, such as any no-parking days for street sweeping
• For their safety (and for the technician’s safety), secure any pets away from the On-Site Service Location

What’s Included:                                                                                                                                                      

• Travel
• On-site Service introductions and survey of Jeep®
• Remove the existing hard-top or soft-top and set aside
• Verify that the top has been stored at room temperature for a minimum of 4 hours prior to the scheduled installation. If needed the top can be laid on concrete in the sun before installation
• Confirm Jeep® Wrangler Jeep JK 2 door, 2007-2018 and installation details with the Consumer
• Install the Bestop following the step-by-step instructions
• Demonstrate all functions of the product; this does not include uninstalling the product

Add-on Services:                                                                                                                                                     

Most customers do not require add-on services. Due to wiring issues, and other variables, additional parts or services can be required for an installation. Below are some common scenarios that might arise. If any of these are needed during your service, your technician will let you know additional work is needed before doing the work.

• Installation where there is no access

Home Installation of Trektop™ Glide for Jeep JK 2 door, 2007-2018

A Manufacturer Certified Technician will install Trektop™ Glide for Jeep JK 2 door, 2007-2018

How to Prepare:                                                                                                                                                       

• Confirm that your product arrives as scheduled and appears ready for installation
• Remove any aftermarket accessories to accommodate the hard-top removal
• Prepare an area to set down the existing hard-top or panels within 20 feet of installation site
• Tops should be installed in a warm environment (ideally around or above 72 degrees Fahrenheit, but this is not necessary. Ask the customer to bring the top indoors the night before the installation.  The fabric will warm up and be more pliable. The fabric expands; the higher the temperature is, the more flexible it will be. The manual recommends laying it in the sun on concrete if this is possible.
• Make sure the Jeep® can be accessed from all sides
• Have a person 18 years or older present for the entire On-Site Service appointment
• As a courtesy, and if applicable, inform your technician of special parking requirements, such as any no-parking days for street sweeping
• For their safety (and for the technician’s safety), secure any pets away from the On-Site Service Location

What’s Included:                                                                                                                                                      

• Travel
• On-site Service introductions and survey of Jeep®
• Remove the existing hard-top or soft-top and set aside
• Verify that the top has been stored at room temperature for a minimum of 4 hours prior to the scheduled installation. If needed the top can be laid on concrete in the sun before installation
• Confirm Jeep® Wrangler Jeep JK 2 door, 2007-2018 and installation details with the Consumer
• Install the Bestop following the step-by-step instructions
• Demonstrate all functions of the product; this does not include uninstalling the product

Add-on Services:                                                                                                                                                     

Most customers do not require add-on services. Due to wiring issues, and other variables, additional parts or services can be required for an installation. Below are some common scenarios that might arise. If any of these are needed during your service, your technician will let you know additional work is needed before doing the work.

• Installation where there is no access

Home Installation of Trektop™ Glide for Jeep JK 4 door, 2007-2018

A Manufacturer Certified Technician will install Trektop™ Glide for Jeep JK 4 door, 2007-2018

How to Prepare:                                                                                                                                                       

• Confirm that your product arrives as scheduled and appears ready for installation
• Remove any aftermarket accessories to accommodate the hard-top removal
• Prepare an area to set down the existing hard-top or panels within 20 feet of installation site
• Tops should be installed in a warm environment (ideally around or above 72 degrees Fahrenheit, but this is not necessary. Ask the customer to bring the top indoors the night before the installation.  The fabric will warm up and be more pliable. The fabric expands; the higher the temperature is, the more flexible it will be. The manual recommends laying it in the sun on concrete if this is possible.
• Make sure the Jeep® can be accessed from all sides
• Have a person 18 years or older present for the entire On-Site Service appointment
• As a courtesy, and if applicable, inform your technician of special parking requirements, such as any no-parking days for street sweeping
• For their safety (and for the technician’s safety), secure any pets away from the On-Site Service Location

What’s Included:                                                                                                                                                      

• Travel
• On-site Service introductions and survey of Jeep®
• Remove the existing hard-top or soft-top and set aside
• Verify that the top has been stored at room temperature for a minimum of 4 hours prior to the scheduled installation. If needed the top can be laid on concrete in the sun before installation
• Confirm Jeep® Wrangler Jeep JK 4 door, 2007-2018 and installation details with the Consumer
• Install the Bestop following the step-by-step instructions
• Demonstrate all functions of the product; this does not include uninstalling the product

Add-on Services:                                                                                                                                                     

Most customers do not require add-on services. Due to wiring issues, and other variables, additional parts or services can be required for an installation. Below are some common scenarios that might arise. If any of these are needed during your service, your technician will let you know additional work is needed before doing the work.

• Installation where there is no access

Home Installation of Trektop™ Glide for Jeep JK 4 door, 2007-2018

A Manufacturer Certified Technician will install Trektop™ Glide for Jeep JK 4 door, 2007-2018

How to Prepare:                                                                                                                                                       

• Confirm that your product arrives as scheduled and appears ready for installation
• Remove any aftermarket accessories to accommodate the hard-top removal
• Prepare an area to set down the existing hard-top or panels within 20 feet of installation site
• Tops should be installed in a warm environment (ideally around or above 72 degrees Fahrenheit, but this is not necessary. Ask the customer to bring the top indoors the night before the installation.  The fabric will warm up and be more pliable. The fabric expands; the higher the temperature is, the more flexible it will be. The manual recommends laying it in the sun on concrete if this is possible.
• Make sure the Jeep® can be accessed from all sides
• Have a person 18 years or older present for the entire On-Site Service appointment
• As a courtesy, and if applicable, inform your technician of special parking requirements, such as any no-parking days for street sweeping
• For their safety (and for the technician’s safety), secure any pets away from the On-Site Service Location

What’s Included:                                                                                                                                                      

• Travel
• On-site Service introductions and survey of Jeep®
• Remove the existing hard-top or soft-top and set aside
• Verify that the top has been stored at room temperature for a minimum of 4 hours prior to the scheduled installation. If needed the top can be laid on concrete in the sun before installation
• Confirm Jeep® Wrangler Jeep JK 4 door, 2007-2018 and installation details with the Consumer
• Install the Bestop following the step-by-step instructions
• Demonstrate all functions of the product; this does not include uninstalling the product

Add-on Services:                                                                                                                                                     

Most customers do not require add-on services. Due to wiring issues, and other variables, additional parts or services can be required for an installation. Below are some common scenarios that might arise. If any of these are needed during your service, your technician will let you know additional work is needed before doing the work.

• Installation where there is no access